Customization: | Available |
---|---|
Application: | High-performance Transducer, Three Phase Transducer |
Output Type: | Triple |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.5kw variable frequency inverter, converting single phase to 3 phase, rated current 7 A, input voltage 1 phase 220V AC ±15%. With RS485 communication mode, inverter single phase to three phase has an input frequency of 50Hz/ 60Hz, and speed regulation reaches 1:100. Come with IP20 enclosure protection, variable frequency drive single phase to 3 phase is widely applied in motor, pumps, and fans.
Basics | Model | G630-2S1.5GB |
Capacity | 1.5kW (2hp) | |
Shipping weight | 2.3 kg | |
Dimension | 189*90*140mm | |
I/O Feature | Rated current | 7A |
Input voltage | single phase AC 220V±15% | |
Input frequency | 47~63Hz | |
Output voltage | 3 phase 0~rated input voltage | |
Output frequency | 0~1000Hz | |
Over load capacity | 150% of rated current for 60s, 180% of rated current for 10s, 200% of rated current for 3s | |
Control Features | Control mode | V/F, Sensorless vector control (SVC), Speed sensor vector control (FVC) |
Operation command mode | Keypad control, Terminal control, Serial communication control | |
Frequency setting mode | Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes. | |
Start frequency | 0.40Hz~20.00Hz | |
Speed adjustment range | 1:50 | |
Carrier frequency | 1.0-16.0kHz, automatically adjusted according to temperature and load characteristics | |
Frequency accuracy | Digital setting: 0.01Hz Analog setting: Maximum frequency * 0.05% |
|
Torque boost | Automatically torque boost; manually torque boost: 0.1%~30.0% | |
V/f curve | Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square) | |
Acceleration/deceleration mode | Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s | |
Jog operation | Jog operation frequency: 0.0Hz~maximum frequency Jog acceleration/deceleration time: 0.1s~3600.0s |
|
Simple PLC & multi-step speed operation | It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal. | |
Built-in PID | Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.) | |
Automatic voltage regulation | Keep output voltage constant automatically when input voltage fluctuating | |
Control Function | Common DC bus | Common DC bus for several VFDs, energy balanced automatically |
Torque control | Torque control without PG | |
Torque limit | "Rooter" characteristics, limit the torque automatically and prevent frequent over-current tripping during the running process | |
Wobble frequency control | Multiple triangular-wave frequency control, special for textile | |
Timing/length/counting control | Timing/length/counting control function | |
Over-voltage & over-current stall control | Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping | |
Fault protection function | Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function | |
Input/output terminals | Input terminals | Programmable DI: 7 on-off inputs, 1 high-speed pulse input 2 programmable AI AI1: 0~10V or 0/4~20mA A12: 0~10V or 0/4~20mA |
Output terminals | 1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output) 2 relay output 2 analog output: 0/4~20mA or 0~10V |
|
Communication terminals | Offer RS485 communication interface, support MODBUS-RTU communication protocol | |
Human machine interface | LED display | Display frequency setting, output frequency, output voltage, output current, etc. |
Multifunction key | QUICK/JOG key, can be used as multifunction key | |
Environment | Ambient temperature | -10ºC~40ºC, derated 4% when the temperature rise by every 1ºC (40ºC~50ºC). |
Humidity | 90%RH or less (non-condensing) | |
Altitude | ≤1000M: Output rated power, >1000M: Output derated | |
Storage temperature | -20ºC~60ºC |
How to wire a single-phase inverter to a motor?